Testing has been enjoyable so far in F1, particularly because of the innovation already on show. The prospect of a mid-grid team - Renault - having come up with a new innovation in F1 is exciting. They've got exhausts coming out of the sidepods instead of the back of the car. This should increase the amount of pressure underneath the car.

Sending exhaust fumes out using the Renault way should become increasingly useful in future seasons because the energy coming from the engine could be used to help power KERS. According to the rules, KERS has to be positioned between the cockpit and the front of the engine, so the movement of the fumes would be a viable means of kinetic energy recovery. Without the need for long-distance transmission of the energy before release, it would be possible to use a much greater proportion of the energy using this source than from the brakes. Energy harvesting would occur under acceleration (when there is generally little demand on the driver), which makes for much better handling than the brake-harvesting version (which ends up altering the behaviour of the car at the point where it is already at its least predictable).

Given that the Le Mans Series primary prototype class now allows any form of energy recovery rather than just the kinetic variety, it's conceivable that an enlightened FIA might permit heat recovery - another mechanism which would make the sidepod-exhausts more useful. Airbox kinetic/heat energy harvesting would be even more useful, but maybe that's hoping for too much innovation from a governing body which stands to gain from regulating as much as possible using as many rules as possible.

I don't agree with KERS in top-level racing, but if we must have KERS, it should be a sensible version. Hopefully, Renault's discovery will encourage the FIA to permit the best of a bad job to be made.

Warning! Long entry alert!

This blog entry was prompted by TEF20's comment in Formula 1 Blog, which in turn was about Ferrari opposing the 4-cylinder engine concept mooted by the FIA for 2013. About a third of the way through replying, I realised this "comment" was not only too long for a comment (2549 words are too many, even by my reckoning!) but only tangentially relevant to the topic. Therefore, it was moved to my blog.

TEF20 was considering in his comment how reducing the amount wind tunnels are used in F1 could allow more testing to happen, therefore making a lot of fans happier because they can see more of the cars (among several other benefits). It certainly sounded an intriguing idea, so I decided to try mathematically test it - with mixed results.

Firstly, it is true that wind tunnels consume colossal amounts of electricity (thus carbon) whenever they are used. We are not talking hairdryers pushing air through plastic sweet tubes onto miniature models here. The vast and vastly powerful variety used in F1 use enough energy that the electricity companies demand to be told before teams turn them on so that demand can be planned. The two tunnels in Brackley (for Mercedes and Force India) probably consume more electricity than everything else in the 12.848 km between Brackley and Silverstone put together (I have no data to confirm this, but if the steelworks in Sheffield, working at full blast, can consume more electricity than the rest of the city put together, then it is surely reasonable to suggest that two powerful industrial energy-guzzlers can use more electricity than the sum total of a few villages).

Secondly, none of the foregoing means that track tests are minor consumers of carbon either. It takes a lot of equipment to conduct a test.

Test teams take at least three lorries with them, alongside cars or buses capable of carrying 45 staff. The lorries would use 17.082 g/km per ton. If the team went in buses (probably the most ecologically sound way of taking that many people), each bus would use 10.249 g/km per passenger.

The Ecology of Test Travel

If we assume that the lorries are 20 tonnes each including their loads, then that gives us 683.28 g/km for the lorries and 461.205 g/km for the buses - or a total of 1144.485 g/km.

So taking Mercedes as an example, quartered the relatively short 12.848 km away from Silverstone. They would need 29.409 kg of carbon emissions to get to the test and back, assuming the test got rained/frozen off.

If a team like Mercedes wishes to avoid that fate (frozen/rained-off testing being completely useless in terms of data collection), it is likely to go to Spain. That means sending everything through the Eurotunnel, down the length of France and down part of north-east Spain to reach the nearest track (Barcelona). I will assume for the sake of ecological sensitivity that nothing is flown. And then return, of course. The distance is 1752.608 km, therefore the carbon emissions would amount to 4011.667 kg, or 4.012 tonnes. Again, before running or indeed the travelling between hotel(s) and test track/travel routes that would be required to make a road-only test work.

If we assume the team must go to a hotel if they wish to stay overnight in Spain, and that (as is common) they stay at the cheapest nearby hotel (Hotel Ciutat at the moment), they need to travel 17.952 km extra per overnight stay. If this is done in buses, that's another 8.280 kg per night. They also need to stay there before and after each test so that they don't waste the first few hours of testing and/or risk total collapse trying to return to the UK. This makes a typical four-day Spanish test (as generally practised in F1 these days) 4.053 tonnes per team.

This mounts up. Each F1 team used 62.5 tonnes on average for fuel in races and tests in 2009. but most of them went to Spain for 4 tests prior to the season beginning and then did 8 local tests in-season. That would be 16.221 tonnes just for the current testing regime (races are more efficient because one Bernie Air plane can take multiple teams' stuff - even though the method of transport is more wasteful per item, less fuel is needed overall due to the airborne equivalent of carpooling).

The Ecology of Wind Tunnel Testing

The entire electricity consumption of the average team for 2009 was 365.412 tonnes. This includes the vast amounts necessary to power the CFD systems currently in place and all the manufacturing equipment as well as the windtunnel situation (teams are only allowed to use one less-than-60%-scale tunnel at a time apart from 16 hours of full-scale tunnel time per year, but there's no rule saying a team can't use one of its tunnels while the other one's going through a maintenance/calibration procedure, for example). If CFD, manufacturing and other non-wind tunnel uses for electricity are assumed to take up 50% of the electricity teams use, that puts wind tunnels on 182.706 tonnes/year. Unfortunately, the data does not exist to tease out how much wind tunnels specifically use.

Provisional Comparison Between Wind Tunnels and Track Tests

Local tests are pretty efficient uses of carbon dioxide. A team could test in its backyard every day for an entire year and not use up half as much carbon dioxide as it would doing one test in Spain. Unfortunately most teams are British and the neighbours would complain.

Testing on the continent when a team is based in England is much more of a problem. Large teams used to do three-day tests every fortnight in-season with a test team that was almost completely separate from the team that went to races, which would clearly be far more expensive than the amount used in factory testing procedures. Even if it were more ecologically efficient, it would not be possible to transfer to such an arrangement in the current climate.

How many four-day long-range tests could a team do with the carbon it would save from relinquishing the right to use a wind tunnel for six months of the year (this would allow the team to still use the tunnel to create its cars, but not to develop them)?

Six months of windtunnel on my back-of-blog calculations would be 91.353 tonnes. Divide that by the 4.053 tonnes each long-range test takes and you get 22.53. Which means that you could do just over twenty-two-and-a-half four-day Spanish tests for the price of having the wind tunnel on for 6 months.

How convenient. That's one for every race of the season with a little bit left over.

Or it would be had FOTA not set themselves a 15% carbon reduction plan to be reached by the end of 2012. So let's take 15% off that and see what we have.

19.15.

Still almost enough for one four-day test after each race of the season. Which would be an interesting idea for enhancing development while massively cutting carbon emissions. CFD-only development would be more efficient than CFD + wind tunnel development in terms of carbon and could be a step towards removing wind tunnels from the equation entirely. Fans would love to see their heroes honing their cars carefully for a relatively low fee, teams and circuit are already set up to accommodate them and it also cuts a lot of the expense connected with travelling because they're already there.

The Villain of the Piece

There is one carbon-related problem though. To test, one must have extra pieces to test. They have to be manufacturered and transported.

There are two forms of carbon source to be considered. In-house consumption of electricity for manufacturing comes from the same 365.412 tonnes of CO2 as the wind tunnel. We've already removed the wind tunnel through a back-of-blog guesstimate of 182.706 tonnes. There are three things using up the rest of that carbon dioxide - CFD, manufacturing and sundry expenses such as lighting and heating. If we say that CFD is 60% (there are some powerful computers used in design work) and the sundry is 10%, that leaves 30% of the non-wind tunnel expenditure - or 15% of the whole - as manufacturing expenditure, making it 54.812 tonnes per team. Materials manfacturing is 613.892 tonnes per year for the average team - just over 50% of the total carbon consumption. So the total carbon used for components per team, on average, is 668.704 tonnes. These do all the races as well as testing and also counts manufacturing errors that never make it to the car in any capacity whatsoever.

That Which Is Obsolete and Useless

Every non-homologated item on the car can be expected to change at least once in a year for those teams that can afford to do so and see some point in the attempt. Some teams' wings changed 10 times in 2010, but that's an extreme. Probably more accurate is to assume for the sake of calculation that everything changes an average of twice a season. When testing enables it, all of these changes will be tested.

Not everything that gets tested makes it onto the car. At the moment, it seems to be accepted that most teams bring along 4-5 major upgrade packages per season to have one of those fail, giving a minimum of 20% failure rate. Extra testing would enable teams to tease out which bit of the package is failing easier, perhaps dropping the failure rate to 10%. The problem comes when one considers the amount that can be tested in a particular test - and therefore rejected.

The amount varies massively from test to test because the agenda could be anything from back-to-back testing of a complete new package against the current one - a process that generally results in one package or the other being fully rejected - to incremental honing and systems checks, both of which involve negligible part rejection. In the most through version of the procedures, it takes three back-to-back runs - 9 laps or about 15 minutes excluding analysis and preparation time - to ascertain whether a component worked. Of course the teams do quite a bit of analysis before accepting or rejecting components, but usually other things would be tested during at least part of that analysis. However, there's simply no way round the fact that parts take time to fit and remove, or that the car will need a wipe-down at the very least after each run to maximise data parity. The preparation figure ranges from about 5 minutes if it's simply a wipe-down plus fitting a new front wing to the best part of half a day for certain combinations of internal component (especially if removal requires the fuel tank to be adjusted in any way). Half an hour average preparation is probably a reasonable ballpark figure, with the caveat that it varies massively according to the components involved.

There are about 80,000 components in a F1 car, but that's not the best figure to use for this set of calculations. Some things (like the engine, which accounts for many of the components) are homologated and therefore can't be modified by the teams. Also, some components (such as fuel tanks) couldn't meaningfully be tested by the teams in this way - they'd be tested using other methods, most often by the third-party suppliers who produce such specialised kit. Finally, some components are typically tested in clusters (come on, have you ever heard of a team taking a gearbox, putting in a different 4th-gear dog ring and then running the car again just to see if the new dog ring is an improvement on the last one?)

Time Is Carbon

Taking another angle, if it takes about 45 minutes to do the running and preparing to test a typical component/cluster and a test typically runs for 7 hours (9-5 am excluding an hour of lunch), then it would be possible to test 9 components/clusters in a day, or 36 per 4-day test. 3.6 of these will prove failures (in that they won't be better than the previous versions).

It's not so simple to derive the average carbon cost of a component because it's not clear what proportion of manufactured components don't make it onto a car. However, if a 1% failure rate is assumed for manufacture (probably an underestimate) and it is considered that teams typically use six chassis in a season, replacing an additional component every 20 minutes a car runs, then a rough estimate can be derived.

The six chassis would be 480,000 components. There were 17 races in 2009, 4 four-day "long-range" Spanish tests and 8 one-day local tests. A race consists of 4 hours of practise, 1 of qualifying and up to 2 hours of racing, so it would be fair to say it has the same mileage as a one-day test, just spread over a longer period of time. So that would be 41 days equivalent of running, with 369 components/clusters tested (and therefore 36.9 proving "failures") and 861 components needing replacement - on top of the components already on the cars. That's a minimum of 481,230 components produced per season excluding failures, meaning at least 4812 components which failed at manufacturing. So the total amount of carbon used in manufacturing must take 486,042 components into account.

From this, the average carbon estimate per component is 668.704 / 486,042 = 0.001375815 tonnes/component or 1.376 kg/component. To put this into perspective, each extra component needed for a F1 team is just under a third of the carbon consumed for travelling to a local test.

This is significant.

The Components of (Climate) Change

If you assume that the six chassis and associated extra components were meant to do exactly the 2009 season and no more, then an adjustment to the carbon figure of extra testing becomes possible.

486,042 / 41 = 11854.683 components used per day.

11854.683 * 1.376 kg/component = 16312.044 kg/day = 16.312 tonnes/day.

16.312 + 0.029 = 16.341 tonnes/test (for a local test)

16.312 * 4 (for a 4-day "long-range" test) = 65.248 tonnes/4-day test.

65.248 + 4.053 = 69.201 tonnes/test (for a long-range test)

So how much testing can now be fitted into that six months of wind tunnel time (in terms of carbon emissions)?

91.353 / 69.201 = 1.320 four-day "long-range" tests. Let's call it 1 and a remainder to see if we can get any local tests out of the remainder:

22.152 / 16.341 = 1.355 local tests. That would be another 1.

At this point, converting windtunnel usage into extra testing time ceases to make much ecological sense.

Conclusions

We've established (albeit with rather more back-of-blog calculation than I'm entirely comfortable with doing) that wind tunnel testing is more efficient carbon-wise than track testing and that the reason is not, as one might suppose, travel, but the manufacture of components to enable that testing to occur. The average team, under normal circumstances, surely gets more out of six months of wind tunnel testing than five days of track testing. The question is: do we, the fans, get as much out of those five testing days as out of the six months of wind tunnel work?

Date: November 16 2009

Currently: Reading F1 Racing (August 2009 edition)

Mood: Proud

Word has come out that Mercedes has bought a 75.1% controlling stake in Brawn. The wording implies that Ross Brawn and his co-purchasers still hold part of their team, but it means that the Brawn name will be seen no more on the grid.

Mercedes will be the name of the Brackley-based team now; a name with a fearsome reputation in F1 as a constructor. It's only done two seasons and they were in 1954 and 1955. It won both championships and then left in response to the Le Mans disaster that also resulted in Switzerland's long-standing ban on motor racing. It is a serious organisation with serious intent; its engines have powered two champions (2008 and 2009) and been significantly involved in two other championship fights (2005 and 2007) in the past five years.

Brawn will not lack funding for a long time because a works engine arrangement, added to the funds Brawn already said it had guaranteed for the future from elsewhere, equals a lot of money at a time when funding requirements are supposed to be going down. Brawn is in a very good place and if Button declines a Brawn seat in 2010 then I think he would be... ...foolish.

McLaren worries me more. I imagine that Mercedes will still supply McLaren if it can, but I can't shake the feeling that total divorce is on the cards for 2015. It must be hoping that the recession will cease to affect the business world by then because otherwise the choice of replacement units is limited.

Hamilton's team-mate may be affected by these changes, but the striking thing to me is that Kimi Raikkonen doesn't seem to be featuring in the rumoured driver line-ups, despite several versions floating around. It may be that Kimi's managment are quietly revising their offer to McLaren, but if not, this is likely to spell the end of Kimi's F1 career in the most pathetic way possible. Two years ago, Kimi Raikkonen was world champion. Now he can't seem to get into any team that he wants because of the champions that succeeded him, plus some psuedopolitics and paddock doubts.

It just goes to show how quickly things move in F1 and how insecure any driver's position ultimately is. If this can happen to Kimi, it can happen (with variations) to any driver...

Today, however, let's look on the bright side: this makes Brawn the only F1 team ever with a 100% record of winning world championships in F1 apart from Mercedes.  By 2011 it could hold that honour alone. That is an incredible statistic and deserves great respect.

It also means that Ross has decisively succeeded in his mission to save the ex-Honda, ex-BAR, ex-Tyrrell team. While it looked likely for a long time due to Brawn's great success on-track and assurances it had its budget for three years secured, the success is sealed and can never be taken from him. Well done to Ross and all his colleagues - Mercedes may take the headlines, but this is really your day.